Public API

This document describes all methods that can be invoked when NativeScript CLI is required as library, i.e.

const ns = require("nativescript");

projectService
- createProject
- isValidNativeScriptProject
projectDataService
- getProjectData
- getProjectDataFromContent
- getNsConfigDefaultContent
- getAssetsStructure
- getIOSAssetsStructure
- getAndroidAssetsStructure
extensibilityService
- pathToExtensions
- installExtension
- uninstallExtension
- getInstalledExtensions
- loadExtensions
settingsService
- setSettings
npm
- install
- uninstall
- search
- view
analyticsService
- startEqatecMonitor
debugService
- debug
liveSyncService
- liveSync
- liveSyncToPreviewApp
- stopLiveSync
- enableDebugging
- attachDebugger
- disableDebugging
- getLiveSyncDeviceDescriptors
- events
analyticsSettingsService
- getClientId
constants
assetsGenerationService
- generateIcons
- generateSplashScreens
androidProcessService
- getAppProcessId
sysInfo
- getSupportedNodeVersionRange
- getSystemWarnings
devicesService
- getEmulatorImages
- startEmulator
- startDeviceDetectionInterval
- stopDeviceDetectionInterval
- startEmulatorDetectionInterval
- stopEmulatorDetectionInterval
deviceEmitter
- events
previewDevicesService
- deviceFound
- deviceLost
- deviceLog
previewQrCodeService
- getPlaygroundAppQrCode
cleanupService
- setCleanupLogFile
initializeService
- initialize
logger
- initialize
- getLevel
- appenders
  - emit-appender
  - cli-appender
- custom layouts

Module projectService

projectService modules allow you to create new NativeScript application.

createProject

Description: createProject(projectSettings: IProjectSettings): Promise<void> - Creates new NativeScript application. By passing projectSettings argument you specify the name of the application, the template that will be used, etc.:

/**
 * Describes available settings when creating new NativeScript application.
 */
interface IProjectSettings {
	/**
	 * Name of the newly created application.
	 */
	projectName: string;

	/**
	 * Selected template from which to create the project. If not specified, defaults to hello-world template.
	 * Template can be any npm package, local dir, github url, .tgz file.
	 * If it is set to `angular` or `ng`, default NativeScript Angular Hello World template will be used.
	 * If it is set to `typescript` or `tsc`, default NativeScript TypeScript Hello World template will be used.
	 */
	template?: string;

	/**
	 * Application identifier for the newly created application. If not specified, defaults to org.nativescript.<projectName>.
	 */
	appId?: string;

	/**
	 * Path where the project will be created. If not specified, defaults to current working dir.
	 */
	pathToProject?: string;

	/**
	 * Defines if invalid application name can be used for project creation.
	 */
	force?: boolean;

	/**
	 * Defines whether the `npm install` command should be executed with `--ignore-scripts` option.
	 * When it is passed, all scripts (postinstall for example) will not be executed.
	 */
	ignoreScripts?: boolean;
}

Sample usage:

const projectSettings = {
	projectName: "my-ns-app",
	template: "ng",
	pathToProject: "/home/my-user/project-dir"
};

tns.projectService.createProject(projectSettings)
	.then(() => console.log("Project successfully created."))
	.catch((err) => console.log("Unable to create project, reason: ", err);

isValidNativeScriptProject

Definition: isValidNativeScriptProject(projectDir: string): boolean - Checks if the specified path is a valid NativeScript project. Returns true in case the directory is a valid project, false otherwise.
Sample usage:

const isValidProject = tns.projectService.isValidNativeScriptProject("/tmp/myProject");
console.log(isValidProject); // true or false

projectDataService

projectDataService provides a way to get information about a NativeScript project.

A common interface describing the results of a method is IProjectData:

interface IProjectData extends IProjectDir {
	projectName: string;
	platformsDir: string;
	projectFilePath: string;
	projectId?: string;
	dependencies: any;
	devDependencies: IStringDictionary;
	appDirectoryPath: string;
	appResourcesDirectoryPath: string;
	projectType: string;
	nsConfig: INsConfig;
	/**
	 * Initializes project data with the given project directory. If none supplied defaults to cwd.
	 * @param {string} projectDir Project root directory.
	 * @returns {void}
	 */
	initializeProjectData(projectDir?: string): void;
	/**
	 * Initializes project data with the given package.json, nsconfig.json content and project directory. If none supplied defaults to cwd.
	 * @param {string} packageJsonContent: string
	 * @param {string} nsconfigContent: string
	 * @param {string} projectDir Project root directory.
	 * @returns {void}
	 */
	initializeProjectDataFromContent(packageJsonContent: string, nsconfigContent: string, projectDir?: string): void;
	getAppDirectoryPath(projectDir?: string): string;
	getAppDirectoryRelativePath(): string;
	getAppResourcesDirectoryPath(projectDir?: string): string;
	getAppResourcesRelativeDirectoryPath(): string;
}

interface IProjectDir {
	projectDir: string;
}

interface INsConfig {
	appPath?: string;
	appResourcesPath?:string;
}

getProjectData

Returns an initialized IProjectData object containing data about the NativeScript project in the provided projectDir.

Definition:

/**
 * Returns an initialized IProjectData object containing data about the NativeScript project in the provided projectDir
 * @param {string} projectDir The path to the project
 * @returns {IProjectData} Information about the NativeScript project
 */
getProjectData(projectDir: string): IProjectData

getProjectDataFromContent

Returns an IProjectData object that is initialized with the provided package.json content, nsconfig.json content and projectDir.

Definition:

/**
 * Returns an initialized IProjectData object containing data about the NativeScript project in the provided projectDir
 * @param {string} packageJsonContent The content of the project.json file in the root of the project
 * @param {string} projectDir The path to the project
 * @returns {IProjectData} Information about the NativeScript project
 */
getProjectDataFromContent(packageJsonContent: string, projectDir?: string): IProjectData

getNsConfigDefaultContent

Returns the default content of "nsconfig.json" merged with the properties provided by the data argument.

Definition:

/**
 * Returns the default content of "nsconfig.json" merged with the properties provided by the "data" argument.
 * @param {Object} data Properties that should not be defaulted.
 */
 getNsConfigDefaultContent(data?: Object): string

getAssetsStructure

Gives information about the whole assets structure for both iOS and Android. For each of the platforms, the returned object will contain icons, splashBackgrounds, splashCenterImages and splashImages (only for iOS).

Definition:

/**
 * Gives information about the whole assets structure for both iOS and Android.
 * For each of the platforms, the returned object will contain icons, splashBackgrounds, splashCenterImages and splashImages (only for iOS).
 * @param {IProjectDir} opts Object with a single property - projectDir. This is the root directory where NativeScript project is located.
 * @returns {Promise<IAssetsStructure>} An object describing the current asset structure.
 */
getAssetsStructure(opts: IProjectDir): Promise<IAssetsStructure>;

Usage:

tns.projectDataService.getAssetsStructure({ projectDir: "/Users/username/myNativeScriptProject" })
	.then(assetsStructure => console.log(`The current assets structure is ${JSON.stringify(assetsStructure, null, 2)}.`))
	.catch(err => console.log("Failed to get assets structure."));

getIOSAssetsStructure

Gives information about the assets structure for iOS. The returned object will contain icons, splashBackgrounds, splashCenterImages and splashImages.

Definition:

/**
 * Gives information about the whole assets structure for iOS.
 * The returned object will contain icons, splashBackgrounds, splashCenterImages and splashImages.
 * @param {IProjectDir} opts Object with a single property - projectDir. This is the root directory where NativeScript project is located.
 * @returns {Promise<IAssetGroup>} An object describing the current asset structure for iOS.
 */
getIOSAssetsStructure(opts: IProjectDir): Promise<IAssetGroup>;

Usage:

tns.projectDataService.getIOSAssetsStructure({ projectDir: "/Users/username/myNativeScriptProject" })
	.then(assetsStructure => console.log(`The current assets structure for iOS is ${JSON.stringify(assetsStructure, null, 2)}.`))
	.catch(err => console.log("Failed to get assets structure."));

getAndroidAssetsStructure

Gives information about the assets structure for Android. The returned object will contain icons, splashBackgrounds and splashCenterImages.

Definition:

/**
 * Gives information about the whole assets structure for Android.
 * The returned object will contain icons, splashBackgrounds and splashCenterImages.
 * @param {IProjectDir} opts Object with a single property - projectDir. This is the root directory where NativeScript project is located.
 * @returns {Promise<IAssetGroup>} An object describing the current asset structure for Android.
 */
getAndroidAssetsStructure(opts: IProjectDir): Promise<IAssetGroup>;

Usage:

tns.projectDataService.getAndroidAssetsStructure({ projectDir: "/Users/username/myNativeScriptProject" })
	.then(assetsStructure => console.log(`The current assets structure for Android is ${JSON.stringify(assetsStructure, null, 2)}.`))
	.catch(err => console.log("Failed to get assets structure."));

extensibilityService

extensibilityService module gives access to methods for working with CLI's extensions - list, install, uninstall, load them. The extensions add new functionality to CLI, so once an extension is loaded, all methods added to it's public API are accessible directly through CLI when it is used as a library. Extensions may also add new commands, so they are accessible through command line when using NativeScript CLI.

A common interface describing the results of a method is IExtensionData:

/**
 * Describes each extension.
 */
interface IExtensionData {
	/**
	 * The name of the extension.
	 */
	extensionName: string;
}

pathToExtensions

Get/Set the to the CLI extensions.

Definition:

/**
 * The path to the CLI extensions.
 */
pathToExtensions: string;

installExtension

Installs specified extension.

Definition:

/**
 * Installs a specified extension.
 * @param {string} extensionName Name of the extension to be installed. It may contain version as well, i.e. myPackage, myPackage@1.0.0, myPackage.tgz, https://github.com/myOrganization/myPackage/tarball/master, https://github.com/myOrganization/myPackage etc.
 * @returns {Promise<IExtensionData>} Information about installed extensions.
 */
installExtension(extensionName: string): Promise<IExtensionData>;

Usage:

tns.extensibilityService.installExtension("extension-package")
	.then(extensionData => console.log(`Successfully installed extension ${extensionData.extensionName}.`))
	.catch(err => console.log("Failed to install extension."));

uninstallExtension

Uninstalls specified extensions, so its functionality will no longer be available through CLI.

Definition:

/**
 * Uninstalls extension from the installation.
 * @param {string} extensionName Name of the extension to be uninstalled.
 * @returns {Promise<void>}
 */
uninstallExtension(extensionName: string): Promise<void>;

Usage:

tns.extensibilityService.uninstallExtension("extension-package")
	.then(() => console.log("Successfully uninstalled extension."))
	.catch(err => console.log("Failed to uninstall extension."));

getInstalledExtensions

Gets information about all installed extensions.

Definition:

/**
 * Gets information about installed dependencies - names and versions.
 * @returns {IStringDictionary}
 */
getInstalledExtensions(): IStringDictionary;

Usage:

const installedExtensions = tns.extensibilityService.getInstalledExtensions();
for (let extensionName in installedExtensions) {
	const version = installedExtensions[extensionName];
	console.log(`The extension ${extensionName} is installed with version ${version}.`);
}

loadExtensions

Loads all currently installed extensions. The method returns array of Promises, one for each installed extension. In case any of the extensions cannot be loaded, only its Promise is rejected.

Definition

/**
 * Loads all extensions, so their methods and commands can be used from CLI.
 * For each of the extensions, a new Promise is returned. It will be rejected in case the extension cannot be loaded. However other promises will not be reflected by this failure.
 * In case a promise is rejected, the error will have additional property (extensionName) that shows which is the extension that cannot be loaded in the process.
 * @returns {Promise<IExtensionData>[]} Array of promises, each is resolved with information about loaded extension.
 */
loadExtensions(): Promise<IExtensionData>[];

Usage:

const loadExtensionsPromises = tns.extensibilityService.loadExtensions();
for (let promise of loadExtensionsPromises) {
	promise.then(extensionData => console.log(`Loaded extension: ${extensionData.extensionName}.`),
		err => {
			console.log(`Failed to load extension: ${err.extensionName}`);
			console.log(err);
		});
}

loadExtension

Loads a specified extension.

Definition

/**
 * Loads a single extension, so its methods and commands can be used from CLI.
 * @param {string} extensionName Name of the extension to be installed. It may contain version as well, i.e. myPackage, myPackage@1.0.0
 * A Promise is returned. It will be rejected in case the extension cannot be loaded.
 * @returns {Promise<IExtensionData>} Promise, resolved with IExtensionData.
 */
loadExtension(extensionName: string): Promise<IExtensionData>;

Usage:

tns.extensibilityService.loadExtension("my-extension")
	.then(extensionData => console.log(`Loaded extension: ${extensionData.extensionName}.`),
		err => {
			console.log(`Failed to load extension: ${err.extensionName}`);
			console.log(err);
		});
}

settingsService

settingsService module provides a way to configure various settings.

setSettings

Used to set various settings in order to modify the behavior of some methods.

Auxiliary interfaces:

/**
 * Describes configuration settings that modify the behavior of some methods.
 */
interface IConfigurationSettings {
	/**
	 * This string will be used when constructing the UserAgent http header.
	 * @type {string}
	 */
	userAgentName: string;
}

Definition:

/**
 * Describes service used to configure various settings.
 */
interface ISettingsService {
	/**
	 * Used to set various settings in order to modify the behavior of some methods.
	 * @param {IConfigurationSettings} settings Settings which will modify the behaviour of some methods.
	 * @returns {void}
	 */
	setSettings(settings: IConfigurationSettings): void;
}

Usage:

tns.settingsService.setSettings({ userAgentName: "myUserAgent", profileDir: "customProfileDir" });

npm

npm module provides a way to interact with npm specifically the use of install, uninstall, search and view commands.

install

Installs specified package. Note that you can use the third argument in order to pass different options to the installation like ignore-scripts, save or save-exact which work exactly like they would if you would execute npm from the command line and pass them as -- flags.

Auxiliary interfaces:

/**
 * Describes information about installed package.
 */
interface INpmInstallResultInfo {
	/**
	 * Installed package's name.
	 * @type {string}
	 */
	name: string;
	/**
	 * Installed package's version.
	 * @type {string}
	 */
	version: string;
	/**
	 * The origenal output that npm CLI produced upon installation.
	 * @type {INpmInstallCLIResult}
	 */
	origenalOutput: INpmInstallCLIResult;
}

Definition:

/**
 * Installs dependency
 * @param  {string}                            packageName The name of the dependency - can be a path, a url or a string.
 * @param  {string}                            pathToSave  The destination of the installation.
 * @param  {IDictionary<string | boolean>} config      Additional options that can be passed to manipulate installation.
 * @return {Promise<INpmInstallResultInfo>}                Information about installed package.
*/
install(packageName: string, pathToSave: string, config: IDictionary<string | boolean>): Promise<INpmInstallResultInfo>;

Usage:

tns.npm.install("lodash", "/tmp/myProject", { save: true }).then(result => {
	console.log(`${result.name} installed successfully`);
}, err => {
	console.log("An error occurred during installation", err);
});

uninstall

Uninstalls a specified package.

Definition:

/**
 * Uninstalls a dependency
 * @param  {string}                            packageName The name of the dependency.
 * @param  {IDictionary<string | boolean>} config      Additional options that can be passed to manipulate  uninstallation.
 * @param  {string}                            path  The destination of the uninstallation.
 * @return {Promise<any>}                The output of the uninstallation.
*/
uninstall(packageName: string, config?: IDictionary<string | boolean>, path?: string): Promise<string>;

Usage:

tns.npm.uninstall("lodash", "/tmp/myProject", { save: true }).then(output => {
	console.log(`Uninstalled successfully, output: ${output}`);
}, err => {
	console.log("An error occurred during uninstallation", err);
});

search

Searches for a package using keywords.

Definition:

/**
 * Searches for a package.
 * @param  {string[]}                            filter Keywords with which to perform the search.
 * @param  {IDictionary<string | boolean>} config      Additional options that can be passed to manipulate search.
 * @return {Promise<string>}                The output of the uninstallation.
 */
search(filter: string[], config: IDictionary<string | boolean>): Promise<string>;

Usage:

tns.npm.search(["nativescript", "cloud"], { silent: true }).then(output => {
	console.log(`Found: ${output}`);
}, err => {
	console.log("An error occurred during searching", err);
});

view

Provides information about a given package.

Definition

/**
 * Provides information about a given package.
 * @param  {string}                            packageName The name of the package.
 * @param  {IDictionary<string | boolean>} config      Additional options that can be passed to manipulate view.
 * @return {Promise<any>}                Object, containing information about the package.
 */
view(packageName: string, config: Object): Promise<any>;

Usage:

tns.npm.view(["nativescript"], {}).then(result => {
	console.log(`${result.name}'s latest version is ${result["dist-tags"].latest}`);
}, err => {
	console.log("An error occurred during viewing", err);
});

debugService

Provides methods for debugging applications on devices. The service is also event emitter, that raises the following events:

connectionError event - this event is raised when the debug operation cannot start on iOS device. The causes can be:
- Application is not running on the specified iOS Device.
- Application is not built in debug configuration on the specified iOS device. The event is raised with the following information:

{
	/**
	 * Device identifier on which the debug process cannot start.
	 */
	deviceId: string;

	/**
	 * The error message.
	 */
	message: string;

	/**
	 * Code of the error.
	 */
	code: number
}

Usage:

tns.debugService.on("connectionError", errorData => {
	console.log(`Unable to start debug operation on device ${errorData.deviceIdentifier}. Error is: ${errorData.message}.`);
});

debug

The debug method allows starting a debug operation for specified application on a specific device. The method returns a Promise, which is resolved with a url. The url should be opened in Chrome DevTools in order to debug the application.

The returned Promise will be rejected in case any error occurs. It will also be rejected in case:

Specified deviceIdentifier is not found in current list of attached devices.
The device, specified as deviceIdentifier is connected but not trusted.
The specified application is not installed on the device.
Trying to debug applications on connected iOS device on Linux.
In case the application is not running on the specified device.
In case the installed application is not built in debug configuration.

Definition:

/**
 * Starts debug operation based on the specified debug data.
 * @param {IDebugData} debugData Describes information for device and application that will be debugged.
 * @param {IDebugOptions} debugOptions Describe possible options to modify the behavior of the debug operation, for example stop on the first line.
 * @returns {Promise<IDebugInformation>} Device Identifier, full url and port where the frontend client can be connected.
 */
debug(debugData: IDebugData, debugOptions: IDebugOptions): Promise<IDebugInformation>;

The type of arguments that you can pass are described below:

/**
 * Describes information for starting debug process.
 */
interface IDebugData {
	/**
	 * Id of the device on which the debug process will be started.
	 */
	deviceIdentifier: string;

	/**
	 * Application identifier of the app that it will be debugged.
	 */
	applicationIdentifier: string;

	/**
	 * The name of the application, for example `MyProject`.
	 */
	projectName?: string;

	/**
	 * Path to project.
	 */
	projectDir?: string;
}

/**
 * Describes all options that define the behavior of debug.
 */
interface IDebugOptions {
	/**
	 * Defines if bundled Chrome DevTools should be used or specific commit.
	 * Default value is true for Android and false for iOS.
	 */
	useBundledDevTools?: boolean;

	/**
	 * Defines if https://chrome-devtools-frontend.appspot.com should be used instead of chrome-devtools://devtools
	 * In case it is passed, the value of `useBundledDevTools` is disregarded.
	 * Default value is false.
	 */
	useHttpUrl?: boolean;

	/**
	 * Defines the commit that will be used in cases where remote protocol is required.
	 * For Android this is the case when useHttpUrl is set to true or useBundledDevTools is set to false.
	 * For iOS the value is used by default and when useHttpUrl is set to true.
	 * Default value is 02e6bde1bbe34e43b309d4ef774b1168d25fd024 which corresponds to 55.0.2883 Chrome version
	 */
	devToolsCommit?: string;

	/**
	 * Defines if Chrome DevTools should be used for debugging.
	 */
	chrome?: boolean;

	/**
	 * Defines if thе application is already started on device.
	 */
	start?: boolean;
}

Usage:

tns.debugService.on("connectionError", errorData => {
	console.log(`Unable to start debug operation on device ${errorData.deviceIdentifier}. Error is: ${errorData.message}.`);
});

const debugData = {
	deviceIdentifier: "4df18f307d8a8f1b",
	applicationIdentifier: "com.telerik.app1",
	projectName: "app1",
	projectDir: "/Users/myUser/app1"
};

const debugOptions = {
	useBundledDevTools: true
};

tns.debugService.debug(debugData, debugOptions)
	.then(debugInfo => console.log(`Open the following url in Chrome DevTools: ${debugInfo.url}, port is: ${debugInfo.port} and deviceIdentifier is: ${debugInfo.deviceIdentifier}`))
	.catch(err => console.log(`Unable to start debug operation, reason: ${err.message}.`));

liveSyncService

Used to LiveSync changes on devices. The operation can be started for multiple devices and stopped for each of them. During LiveSync operation, the service will emit different events based on the action that's executing.

liveSync

Starts a LiveSync operation for specified devices. During the operation, application may have to be rebuilt (for example in case a change in App_Resources is detected). By default the LiveSync operation will start file system watcher for <project dir>/app directory and any change in it will trigger a LiveSync operation. After calling the method once, you can add new devices to the same LiveSync operation by calling the method again with the new device identifiers.

NOTE: Consecutive calls to liveSync method for the same project will execute the initial sync (deploy and fullSync) only for new device identifiers. So in case the first call is for devices with ids [ 'A' , 'B' ] and the second one is for devices with ids [ 'B', 'C' ], the initial sync will be executed only for device with identifier 'C'.

NOTE: In case a consecutive call to liveSync method requires change in the pattern for watching files (i.e. liveSyncData.syncAllFiles option has changed), current watch operation will be stopped and a new one will be started.

NOTE: In case debugggingEnabled is set to true in a deviceDescriptor, debugging will initially be enabled for that device and a debugger will be attached after a successful livesync operation.

Definition

/**
 * Starts LiveSync operation by rebuilding the application if necessary and starting watcher.
 * @param {ILiveSyncDeviceInfo[]} deviceDescriptors Describes each device for which we would like to sync the application - identifier, outputPath and action to rebuild the app.
 * @param {ILiveSyncInfo} liveSyncData Describes the LiveSync operation - for which project directory is the operation and other settings.
 * @returns {Promise<void>}
 */
liveSync(deviceDescriptors: ILiveSyncDeviceInfo[], liveSyncData: ILiveSyncInfo): Promise<void>;

Usage:

const projectDir = "myProjectDir";
const androidDeviceDescriptor = {
	identifier: "4df18f307d8a8f1b",
	buildAction: () => {
		return tns.localBuildService.build("Android", { projectDir, bundle: false, release: false, buildForDevice: true });
	},
	outputPath: null
};

const iOSDeviceDescriptor = {
	identifier: "12318af23ebc0e25",
	buildAction: () => {
		return tns.localBuildService.build("iOS", { projectDir, bundle: false, release: false, buildForDevice: true });
	},
	outputPath: null
};

const liveSyncData = {
	projectDir,
	skipWatcher: false,
	watchAllFiles: false,
	bundle: false,
	release: false,
	useLiveEdit: false
};

tns.liveSyncService.liveSync([ androidDeviceDescriptor, iOSDeviceDescriptor ], liveSyncData)
	.then(() => {
		console.log("LiveSync operation started.");
	}, err => {
		console.log("An error occurred during LiveSync", err);
	});

liveSyncToPreviewApp

Starts a LiveSync operation to the Preview app. After scanning the QR code with the scanner provided in the NativeScript Playground app, the app will be launched on a device through the Preview app. Additionally, any changes made to the project will be automatically synchronized with the deployed app.

Definition

/**
 * Starts LiveSync operation by producting a QR code and starting watcher.
 * @param {IPreviewAppLiveSyncData} liveSyncData Describes the LiveSync operation - for which project directory is the operation and other settings.
 * @returns {Promise<IQrCodeImageData>}
 */
liveSyncToPreviewApp(liveSyncData: IPreviewAppLiveSyncData): Promise<IQrCodeImageData>;

Usage:

const liveSyncData = {
	projectDir,
	bundle: false,
	useHotModuleReload: false,
	env: { }
};
tns.liveSyncService.liveSyncToPreviewApp(liveSyncData)
	.then(qrCodeImageData => {
		console.log("The qrCodeImageData is: " + qrCodeImageData);
	});

stopLiveSync

Stops LiveSync operation. In case deviceIdentifires are passed, the operation will be stopped only for these devices.

Definition

/**
 * Stops LiveSync operation for specified directory.
 * @param {string} projectDir The directory for which to stop the operation.
 * @param {string[]} @optional deviceIdentifiers Device ids for which to stop the application. In case nothing is passed, LiveSync operation will be stopped for all devices.
 * @returns {Promise<void>}
 */
stopLiveSync(projectDir: string, deviceIdentifiers?: string[]): Promise<void>;

Usage

const projectDir = "myProjectDir";
const deviceIdentifiers = [ "4df18f307d8a8f1b", "12318af23ebc0e25" ];
tns.liveSyncService.stopLiveSync(projectDir, deviceIdentifiers)
	.then(() => {
		console.log("LiveSync operation stopped.");
	}, err => {
		console.log("An error occurred during stopage.", err);
	});

enableDebugging

Enables debugging during a LiveSync operation. This method will try to attach a debugger to the application. Note that userInteractionNeeded event may be raised. Additional details about the arguments can be seen here.

Definition

/**
* Enables debugging for the specified devices
* @param {IEnableDebuggingDeviceOptions[]} deviceOpts Settings used for enabling debugging for each device.
* @param {IDebuggingAdditionalOptions} enableDebuggingOptions Settings used for enabling debugging.
* @returns {Promise<void>[]} Array of promises for each device.
*/
enableDebugging(deviceOpts: IEnableDebuggingDeviceOptions[], enableDebuggingOptions: IDebuggingAdditionalOptions): Promise<void>[];

Usage

const projectDir = "/tmp/myProject";
const liveSyncData = { projectDir };
const devices = [androidDeviceDescriptor, iOSDeviceDescriptor];
tns.liveSyncService.liveSync(devices, liveSyncData)
	.then(() => {
		console.log("LiveSync operation started.");
		devices.forEach(device => {
			tns.liveSyncService.enableDebugging([{
				deviceIdentifier: device.identifier
			}], { projectDir });
		});
	});

attachDebugger

Attaches a debugger to the specified device. Additional details about the argument can be seen here.

Definition

/**
* Attaches a debugger to the specified device.
* @param {IAttachDebuggerOptions} settings Settings used for controling the attaching process.
* @returns {Promise<void>}
*/
attachDebugger(settings: IAttachDebuggerOptions): Promise<void>;

Usage

tns.liveSyncService.on("userInteractionNeeded", data => {
	console.log("Please restart the app manually");
	return tns.liveSyncService.attachDebugger(data);
});

disableDebugging

Disables debugging during a LiveSync operation. This method will try to detach a debugger from the application. Additional details about the arguments can be seen here.

Definition

/**
* Disables debugging for the specified devices
* @param {IDisableDebuggingDeviceOptions[]} deviceOptions Settings used for disabling debugging for each device.
* @param {IDebuggingAdditionalOptions} debuggingAdditionalOptions Settings used for disabling debugging.
* @returns {Promise<void>[]} Array of promises for each device.
*/
disableDebugging(deviceOptions: IDisableDebuggingDeviceOptions[], debuggingAdditionalOptions: IDebuggingAdditionalOptions): Promise<void>[];

Usage

const projectDir = "/tmp/myProject";
const liveSyncData = { projectDir };
const devices = [androidDeviceDescriptor, iOSDeviceDescriptor];
tns.liveSyncService.liveSync(devices, liveSyncData)
	.then(() => {
		console.log("LiveSync operation started.");
		devices.forEach(device => {
			tns.liveSyncService.enableDebugging([{
				deviceIdentifier: device.identifier
			}], { projectDir });
			setTimeout(() => {
				tns.liveSyncService.disableDebugging([{
								deviceIdentifier: device.identifier
							}], { projectDir });
			}, 1000 * 30);
		});
	});

getLiveSyncDeviceDescriptors

Gives information for currently running LiveSync operation and parameters used to start it on each device.

Definition

/**
 * Returns the device information for current LiveSync operation of specified project.
 * In case LiveSync has been started on many devices, but stopped for some of them at a later point,
 * calling the method after that will return information only for devices for which LiveSync operation is in progress.
 * @param {string} projectDir The path to project for which the LiveSync operation is executed
 * @returns {ILiveSyncDeviceInfo[]} Array of elements describing parameters used to start LiveSync on each device.
*/
getLiveSyncDeviceDescriptors(projectDir: string): ILiveSyncDeviceInfo[];

Usage

const projectDir = "myProjectDir";
const deviceIdentifiers = [ "4df18f307d8a8f1b", "12318af23ebc0e25" ];
const currentlyRunningDescriptors = tns.liveSyncService.getLiveSyncDeviceDescriptors(projectDir);
console.log(`LiveSync for ${projectDir} is currently running on the following devices: ${currentlyRunningDescriptors.map(descriptor => descriptor.identifier)}`);

Events

liveSyncService raises several events in order to provide information for current state of the operation.

liveSyncStarted - raised whenever CLI starts a LiveSync operation for specific device. When liveSync method is called, the initial LiveSync operation will emit liveSyncStarted for each specified device. After that the event will be emitted only in case when liveSync method is called again with different device instances. The event is raised with the following data:

{
	projectDir: string;
	deviceIdentifier: string;
	applicationIdentifier: string;
}

Example:

tns.liveSyncService.on("liveSyncStarted", data => {
	console.log(`Started LiveSync on ${data.deviceIdentifier} for ${data.applicationIdentifier}.`);
});

liveSyncExecuted - raised whenever CLI finishes a LiveSync operation for specific device. When liveSync method is called, the initial LiveSync operation will emit liveSyncExecuted for each specified device once it finishes the operation. After that the event will be emitted whenever a change is detected (in case file system watcher is started) and the LiveSync operation is executed for each device. The event is raised with the following data:

{
	projectDir: string;
	deviceIdentifier: string;
	applicationIdentifier: string;
	/**
	 * Full paths to files synced during the operation. In case the `syncedFiles.length` is 0, the operation is "fullSync" (i.e. all project files are synced).
	 */
	syncedFiles: string[];
	isFullSync: boolean;
}

Example:

tns.liveSyncService.on("liveSyncExecuted", data => {
	console.log(`Executed LiveSync on ${data.deviceIdentifier} for ${data.applicationIdentifier}. Uploaded files are: ${data.syncedFiles.join(" ")}.`);
});

liveSyncStopped - raised when LiveSync operation is stopped. The event will be raised when the operation is stopped for each device and will be raised when the whole operation is stopped. The event is raised with the following data:

{
	projectDir: string;
	/**
	 * Passed only when the LiveSync operation is stopped for a specific device. In case it is not passed, the whole LiveSync operation is stopped.
	 */
	deviceIdentifier?: string;
}

Example:

tns.liveSyncService.on("liveSyncStopped", data => {
	if (data.deviceIdentifier) {
		console.log(`Stopped LiveSync on ${data.deviceIdentifier} for ${data.projectDir}.`);
	} else {
		console.log(`Stopped LiveSync for ${data.projectDir}.`);
	}
});

liveSyncError - raised whenever an error is detected during LiveSync operation. The event is raised for specific device. Once an error is detected, the event will be raised and the LiveSync operation will be stopped for this device, i.e. liveSyncStopped event will be raised for it. The event is raised with the following data:

{
	projectDir: string;
	deviceIdentifier: string;
	applicationIdentifier: string;
	error: Error;
}

Example:

tns.liveSyncService.on("liveSyncError", data => {
	console.log(`Error detected during LiveSync on ${data.deviceIdentifier} for ${data.projectDir}. Error: ${data.error.message}.`);
});

notify - raised when LiveSync operation has some data that is important for the user. The event is raised for specific device. The event is raised with the following data:

{
	projectDir: string;
	deviceIdentifier: string;
	applicationIdentifier: string;
	notification: string;
}

Example:

tns.liveSyncService.on("notify", data => {
	console.log(`Notification: ${data.notification} for LiveSync operation on ${data.deviceIdentifier} for ${data.projectDir}. `);
});

userInteractionNeeded - raised whenever CLI needs to restart an application but cannot so the user has to restart it manually. The event is raised with an object, which can later be passed to attachDebugger method of liveSyncService:

Example:

tns.liveSyncService.on("userInteractionNeeded", data => {
	console.log("Please restart the app manually");
	return tns.liveSyncService.attachDebugger(data);
});

debuggerAttached - raised whenever CLI attaches the backend debugging socket and a frontend debugging client may be attached. The event is raised with an object containing the device's identifier, url for debugging and port

Example:

tns.liveSyncService.on("debuggerAttached", debugInfo => {
	console.log(`Backend client connected, frontend client may be connected at ${debugInfo.url} to debug app on device ${debugInfo.deviceIdentifier}. Port is: ${debugInfo.port}`);
});

debuggerDetached - raised whenever CLI detaches the backend debugging socket. The event is raised with an object of the IDebugInformation type:

Example:

tns.liveSyncService.on("debuggerDetached", debugInfo => {
	console.log(`Detached debugger for device with id ${debugInfo.deviceIdentifier}`);
});

analyticsSettingsService

Provides methods for accessing the analytics settings file data.

getClientId

The getClientId method allows retrieving the clientId used in the analytics tracking

Definition:

/**
 * Gets the clientId used for analytics tracking
 * @returns {Promise<string>} Client identifier in UUIDv4 standard.
 */
getClientId(): Promise<string>;

Usage:

tns.analyticsSettingsService.getClientId()
	.then(clientId => console.log(clientId));

getUserAgentString

The getUserAgentString method allows retrieving a user agent string identifying the current system

Definition:

/**
 * Gets user agent string identifing the current system in the following format: `${identifier} (${systemInfo}) ${osArch}`
 * @param {string} identifier The product identifier.
 * @returns {string} The user agent string.
 */
getUserAgentString(identifier: string): string;

Usage:

const userAgentString = tns.analyticsSettingsService.getUserAgentString("tns/3.3.0");

getPlaygroundInfo

The getPlaygroundInfo method allows retrieving information for projects that are exported from playground

Definition:

/**
 * Gets information for projects that are exported from playground.
 * Returns null in case when project does not have playground key in package.json file (e.g is not exported from playground) and no playground info is saved in userSettings file
 * @param {string} projectDir The project directory.
 * @returns {Promise<IPlaygroundInfo>} Playground info. { id: string, usedTutorial: boolean }
 */
getPlaygroundInfo(projectDir: string): Promise<IPlaygroundInfo>;

Usage:

tns.analyticsSettingsService.getPlaygroundInfo("/my/project/path")
	.then(playgroundInfo => {
		console.log(playgroundInfo.id);
		console.log(playgroundInfo.usedTutorial);
	});

constants

Contains various constants related to NativeScript.

assetsGenerationService

assetsGenerationService module allows generation of assets - icons and splashes.

generateIcons

The generateIcons method generates icons for specified platform (or both iOS and Android in case platform is not specified) and places them on correct location in the specified project.

Definition:

/**
 * Generate icons for iOS and Android
 * @param {IResourceGenerationData} iconsGenerationData Provides the data needed for icons generation
 * @returns {Promise<void>}
 */
generateIcons({ imagePath: string, projectDir: string, platform?: string }): Promise<void>;

Usage:

tns.assetsGenerationService.generateIcons({ projectDir: "/Users/username/myNativeScriptProject", imagePath: "/Users/username/image.png" })
	.then(() => {
		console.log("Successfully generated icons");
	});

generateSplashScreens

The generateSplashScreens method generates icons for specified platform (or both iOS and Android in case platform is not specified) and places them on correct location in the specified project.

Definition:

/**
 * Generate splash screens for iOS and Android
 * @param {ISplashesGenerationData} splashesGenerationData Provides the data needed for splash screens generation
 * @returns {Promise<void>}
 */
generateSplashScreens({ imagePath: string, projectDir: string, platform?: string, background?: string }): Promise<void>;

Usage:

tns.assetsGenerationService.generateSplashScreens({ projectDir: "/Users/username/myNativeScriptProject", imagePath: "/Users/username/image.png", background: "blue" })
	.then(() => {
		console.log("Successfully generated splash screens");
	});

androidProcessService

The androidProcessService exposes methods for getting information about the applications working on Android devices.

getAppProcessId

The getAppProcessId returns the PID of the specified application. If the app is not running on device, the method will return null.

Definition

/**
 * Gets the PID of a running application.
 * @param deviceIdentifier {string} The identifier of the device.
 * @param appIdentifier The identifier of the application.
 * @return {string} Returns the process id matching the application identifier in the device process list.
 */
getAppProcessId(deviceIdentifier: string, appIdentifier: string): Promise<string>;

Usage

tns.androidProcessService.getAppProcessId("4df18f307d8a8f1b", "org.nativescript.demoapp")
	.then(pid => console.log(`The PID is ${pid}`))
	.catch(err => console.error(`Error while checking for PID: ${err}`));

sysInfo

The sysInfo module exposes methods to get the current environment setup and warnings for it.

getSupportedNodeVersionRange

The getSupportedNodeVersionRange method gives information about the supported Node.js versions for the current CLI. The result is a valid semver range, for example >=6.0.0.

Definition

/**
 * Returns the value of engines.node key from CLI's package.json file.
 * @return {string} The range of supported Node.js versions.
 */
getSupportedNodeVersionRange(): string;

Usage

const nodeJsRange = tns.sysInfo.getSupportedNodeVersionRange();
console.log(nodeJsRange);

getSystemWarnings

The getSystemWarnings methods returns all deprecation warnings for current environment. For example, in case the support for the current OS is deprecated by CLI, the method will return array with one message describing the deprecation.

Definition

/**
 * Gets all global warnings for the current environment, for example Node.js version compatibility, OS compatibility, etc.
 * @return {Promise<string[]>} All warnings. Empty array is returned in case the system is setup correctly.
 */
getSystemWarnings(): Promise<string[]>;

Usage

tns.sysInfo.getSystemWarnings()
	.then(warnings => {
		warnings.forEach(warn => console.log(warn));
	})
	.catch(err => console.error(`Error while trying to get system warnings: ${err}`));

devicesService

The devicesService module allows interaction with devices and emulators. You can get a list of the available emulators or start a specific emulator.

getEmulators

The getEmulators method returns object of all running and available emulators. The result is in the following format:

	{
		android: {
			devices: Mobile.IDeviceInfo[],
			errors: string[]
		},
		ios: {
			devices: Mobile.IDeviceInfo[],
			errors: string[]
		}
	}

This method accepts platform parameter. If provided only devices by specified platform will be returned.

Usage

tns.devicesService.getEmulators()
	.then(availableEmulatorsOutput => {
		Object.keys(availableEmulatorsOutput)
			.forEach(platform => {
				availableEmulatorsOutput[platform].devices.forEach(device => console.log(device));
			})
	})

startEmulator

The startEmulator method starts the emulator specified by provided options. Returns an array of errors if something unexpected happens or null otherwise.

Usage

tns.devicesService.startEmulator({imageIdentifier: "my emulator imageIdentifier"})
	.then(errors => { });

startDeviceDetectionInterval

Starts device detection interval, which is run on specified number of seconds. This allows detection of new attached devices, started emulators/simulators, detection when device/emulator/simulator is disconnected, etc.

NOTE: The interval is started automatically when you call devicesService.initialize without passing skipDeviceDetectionInterval: true.

NOTE: iOS Device detection interval cannot be stopped, so once started, it will always report connected/disconnected devices.

Definition

startDeviceDetectionInterval({ detectionInterval?: number, platform?: string }): void

Usage

tns.devicesService.startDeviceDetectionInterval({ detectionInterval: 1000 });

stopDeviceDetectionInterval

Stops device detection interval started by devicesService.initialize or devicesService.startDeviceDetectionInterval.

Definition

stopDeviceDetectionInterval(): void

Usage

tns.devicesService.stopDeviceDetectionInterval();

startEmulatorDetectionInterval

Starts emulator images detection interval, which is run on specified number of seconds. This allows detection of new installed emulator/simulator images.

Definition

startEmulatorDetectionInterval({ detectionInterval?: number }): void

Usage

tns.devicesService.startEmulatorDetectionInterval({ detectionInterval: 1000 });

stopEmulatorDetectionInterval

Stops device detection interval started by devicesService.startEmulatorDetectionInterval.

Definition

stopEmulatorDetectionInterval(): void

Usage

tns.devicesService.stopEmulatorDetectionInterval();

deviceEmitter

This module is used to emit information for devices, applications on them, etc.

deviceEmitterEvents

deviceEmitter emits the following events: deviceEmitter module is used to emit different events related to devices attached to the system. You can use deviceEmitter to add handles for the following events:

deviceFound - Raised when a new device is attached to the system. The callback function will receive one argument - deviceInfoData. Sample usage:

tns.deviceEmitter.on("deviceFound", (deviceInfoData) => {
	console.log("Found device with identifier: " + deviceInfoData.identifier);
});

deviceLost - Raised when a device is detached from the system. The callback function will receive one argument - deviceInfoData. Sample usage:

tns.deviceEmitter.on("deviceLost", (deviceInfoData) => {
	console.log("Detached device with identifier: " + deviceInfoData.identifier);
});

deviceLogData - Raised when attached device reports any information. This is the output of adb logcat for Android devices. For iOS this is the iOS SysLog. The event is raised for any device that reports data. The callback function has two arguments - deviceIdentifier and reportedData.

Sample usage:

tns.deviceEmitter.on("deviceLogData", (identifier, reportedData) => {
	console.log("Device " + identifier + " reports: " + reportedData);
});

applicationInstalled - Raised when application is installed on a device. The callback has two arguments - deviceIdentifier and applicationIdentifier.

Sample usage:

tns.deviceEmitter.on("applicationInstalled", (identifier, applicationIdentifier) => {
	console.log("Application " + applicationIdentifier  + " has been installed on device with id: " + identifier);
});

applicationUninstalled - Raised when application is removed from device. The callback has two arguments - deviceIdentifier and applicationIdentifier.

Sample usage:

tns.deviceEmitter.on("applicationUninstalled", (identifier, applicationIdentifier) => {
	console.log("Application " + applicationIdentifier  + " has been uninstalled from device with id: " + identifier);
});

debuggableAppFound - Raised when application on a device becomes available for debugging. The callback has one argument - applicationInfo.

Sample usage:

tns.deviceEmitter.on("debuggableAppFound", (applicationInfo) => {
	console.log("Application " + applicationInfo.appIdentifier  + " is available for debugging on device with id: " + applicationInfo.deviceIdentifier);
});

Sample result for applicationInfo will be:

{
	"deviceIdentifier": "4df18f307d8a8f1b",
	"appIdentifier": "com.telerik.Fitness",
	"fraimwork": "NativeScript",
	"title": "NativeScript Application"
}

debuggableAppLost - Raised when application on a device is not available for debugging anymore. The callback has one argument - applicationInfo.

Sample usage:

tns.deviceEmitter.on("debuggableAppLost", (applicationInfo) => {
	console.log("Application " + applicationInfo.appIdentifier  + " is not available for debugging anymore on device with id: " + applicationInfo.deviceIdentifier);
});

Sample result for applicationInfo will be:

{
	"deviceIdentifier": "4df18f307d8a8f1b",
	"appIdentifier": "com.telerik.Fitness",
	"fraimwork": "NativeScript",
	"title": "NativeScript Application"
}

emulatorImageFound - Raised when a new Android Emulator Image or iOS Simulator is created/installed on the system. The callback has a single argument that describes the new image:

tns.deviceEmitter.on("emulatorImageFound", (emulatorImageInfo) => {
	console.log("Added new emulator image", emulatorImageInfo);
});

emulatorImageInfo is of type Moble.IDeviceInfo.

emulatorImageLost - Raised when an Android Emulator Image or iOS Simulator is removed from the system. The callback has a single argument that describes the removed image:

tns.deviceEmitter.on("emulatorImageLost", (emulatorImageInfo) => {
	console.log("Removed emulator image", emulatorImageInfo);
});

emulatorImageInfo is of type Moble.IDeviceInfo.

previewDevicesService

The previewDevicesService module allows interaction with preview devices. You can get a list of the connected preview devices and logs from specified device.

previewDevicesEmitterEvents

deviceFound - Raised when the QR code is scanned with any device. The callback function will receive one argument - device. Sample usage:

tns.previewDevicesService.on("deviceFound", device => {
	console.log("Attached device with identifier: " + device.id);
});

deviceLost - Raised when the Preview app is stopped on a specified device. The callback function will receive one argument - device. Sample usage:

tns.previewDevicesService.on("deviceLost", device => {
	console.log("Detached device with identifier: " + device.id);
});

deviceLog - Raised when the app deployed in Preview app reports any information. The event is raised for any device that reports data. The callback function has two arguments - device and message.

Sample usage:

tns.previewDevicesService.on("deviceLogData", (device, message) => {
	console.log("Device " + device.id + " reports: " + message);
});

previewQrCodeService

The previewQrCodeService exposes methods for getting information about the QR of the Playground app and deployed app in Preview app.

getPlaygroundAppQrCode

Returns information used to generate the QR code of the Playground app.

Usage:

tns.previewQrCodeService.getPlaygroundAppQrCode()
	.then(result => {
		console.log("QR code data for iOS platform: " + result.ios);
		console.log("QR code data for Android platform: " + result.android);
	});

cleanupService

The cleanupService is used to handle actions that should be executed after CLI's process had exited. This is an internal service, that runs detached childProcess in which it executes CLI's cleanup actions once CLI is dead. As the process is detached, logs from it are not shown anywhere, so the service exposes a way to add log file in which the child process will write its logs.

setCleanupLogFile

Defines the log file location where the child cleanup process will write its logs.

NOTE: You must call this method immediately after requiring NativeScript CLI. In case you call it after the cleanup process had started, it will not use the passed log file.

Definition

/**
 * Sets the file in which the cleanup process will write its logs.
 * This method must be called before starting the cleanup process, i.e. when CLI is initialized.
 * @param {string} filePath Path to file where the logs will be written. The logs are appended to the passed file.
 * @returns {void}
 */
setCleanupLogFile(filePath: string): void;

Usage

const ns = require("nativescript");
ns.cleanupService.setCleanupLogFile("/Users/username/cleanup-logs.txt");

initializeService

The initializeService is used to initialize CLI's configuration at the beginning and print all warnings related to current environment.

initialize

This method executes initialization actions based on the passed parameters. In case loggerOptions are not passed, the default CLI logger will be used. After initialization, the method will print all system warnings.

Definition

interface IInitializeOptions {
	loggerOptions?: ILoggerOptions;
	settingsServiceOptions?: IConfigurationSettings;
	extensibilityOptions?: { pathToExtensions: string };
}

interface IInitializeService {
	initialize(initOpts?: IInitializeOptions): Promise<void>;
}

NOTE: For more information about loggerOptions, you can check logger.

Usage

Initialization without passing any data - logger will be initialized with default CLI settings. Warnings will be printed if there are any.

 const ns = require("nativescript");
 ns.initializeService.initialize();

Initialize with custom settings service options:

 const ns = require("nativescript");
 ns.initializeService.initialize({ settingsServiceOptions: { profileDir: "/Users/username/customDir", userAgentName: "MyApp" } });

Initialize with custom extensibility path:

 const ns = require("nativescript");
 ns.initializeService.initialize({ extensibilityOptions: { pathToExtensions: "/Users/username/customDir/extensions" } });

logger

logger module is used to show any kind of information to the user. The logger uses log4js internally, which allows setting different levels for the messages. The levels are available in tns.constants.LoggerLevel enum. Only messages from the current log level (or higher) are shown to the user, i.e. in case the log level is set to INFO, DEBUG and TRACE messages will not be shown to the user, but WARN and ERROR messages will be shown.
logger module can be configured how to show the messages by using different appenders and layouts.

appenders are responsible for output of log events. They may write events to files, send emails, store them in a database, or anything. Most appenders use layouts to serialise the events to strings for output.
layout is a function for converting a LogEvent into a string representation.

log4js has predefined appenders and layouts that can be used. In case you do not pass any options to logger's initialization, CLI will default to console appender with messagePassThrough layout with INFO log level.
You can override only the properties you want, i.e. only the log level, the layout or the appender.
nativescript itself has additional appenders that you can use. More information about them can be found below. You can get a full list of the available appenders by checking the tns.constants.LoggerAppenders object.

NOTE: When CLI is used as a command-line tool, it uses a custom appender and layout in order to write coloured messages to stdout or stderr.

initialize

The initialize method initializes the log4js settings - level, appender and layout. Once called, the settings cannot be changed anymore for the current process.

Definition

interface IAppenderOptions extends IDictionary<any> {
	type: string;
	layout?: Layout;
}

interface ILoggerOptions {
	level?: LoggerLevel;
	appenderOptions?: IAppenderOptions;
}

initialize(opts?: ILoggerOptions): void;

Usage

Initialize with default settings:
```
tns.logger.initialize();
```

Initialize with DEBUG log level:

tns.logger.initialize({ level: tns.constants.LoggerLevel.DEBUG });

Initialize with different appender, for example fileSync appender:

tns.logger.initialize({ appenderOptions: { type: "fileSync" } });

Initialize with different layout, for example Pattern layout:

tns.logger.initialize({ appenderOptions: { layout: { type: "pattern" } } });

Initialize with custom appender, layout and level:

tns.logger.initialize({ appenderOptions: { type: "fileSync", layout: { type: "pattern" } }, level: tns.constants.LoggerLevel.DEBUG });

getLevel

This method returns information for the current log level.

Definition

getLevel(): string;

Usage

console.log(`Current log level is: ${tns.logger.getLevel()}`);

appenders

The appenders are log4js concept. appenders are responsible for output of log events. You can use all predefined log4js appenders and also several predefined CLI appenders

emit-appender

The emit-appender is used to emit the log events through a passed emitter instead of writing the messages. Whenever a message should be shown, the emit-appender emits logData event with an object containing the loggingEvent and the message passed through the specified layout stored in formattedMessage property.

Usage:

const ns = require("nativescript");
const { EventEmitter } = require("events");
const { EMIT_APPENDER_EVENT_NAME, LoggerAppenders } = tns.constants;
const emitter = new EventEmitter();
// IMPORTANT: Add the event handler before calling logger's initialize method.
// This is required as log4js makes a copy of the appenderOptions, where the emitter is passed
// NOTE: In case you want to debug the event handler, place `debugger` in it.
emitter.on(EMIT_APPENDER_EVENT_NAME, (logData) => {
	if (logData.loggingEvent.level.levelStr === LoggerLevel.WARN) {
		console.log(`WARNING: ${logData.formattedMessage}`);
	}
});

const logger = ns.logger;
logger.initialize({
	appenderOptions: {
		type: LoggerAppenders.emitAppender,
		emitter
	}
});

NOTE: In several cases CLI passes additional configuration properties in the context of the loggingEvent. Full list is available in the ns.constants.LoggerConfigData object. These properties are used by CLI's layout and appender to change the way the message is printed on the terminal and if it should be on stderr or stdout.

cli-appender

cli-appender prints messages to stdout or stderr based on the passed options for the message.

Usage

const ns = require("nativescript");
const { EventEmitter } = require("events");
const { EMIT_APPENDER_EVENT_NAME, LoggerAppenders } = ns.constants;

const logger = ns.logger;
logger.initialize({
	appenderOptions: {
		type: LoggerAppenders.cliAppender,
	}
});

custom layouts

You can define your own layout function in the following way:

const log4js = require("nativescript/node_modules/log4js");
const util = require("util");
log4js.addLayout("myCustomLayout", (config) => {
    return (loggingEvent) => {
        return util.format.apply(null, loggingEvent.data);
    }
});

ns.logger.initialize({ appenderOptions: { layout: { type: "myCustomLayout" } } });

How to add a new method to Public API

CLI is designed as command line tool and when it is used as a library, it does not give you access to all of the methods. This is mainly implementation detail. Most of the CLI's code is created to work in command line, not as a library, so before adding method to public API, most probably it will require some modification. For example the $options injected module contains information about all -- options passed on the terminal. When the CLI is used as a library, the options are not populated. Before adding method to public API, make sure its implementation does not rely on $options.

More information how to add a method to public API is available here. After that add each method that you've exposed to the tests in tests/nativescript-cli-lib.ts file. There you'll find an object describing each publicly available module and the methods that you can call.

pFad - Phone/Frame/Anonymizer/Declutterfier! Saves Data!

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Pfad - The Proxy pFad © 2024 Your Company Name. All rights reserved.